AC sensor Flex
Current sensor for measuring energy flows in the household
Advantages
- Current sensor for 1- and 3-phase direct measurement and transformer measurement
- For simple mounting on the top-hat rail in the switch cabinet
- High measurement accuracy
- EnergyManager ready
- Integrated CAN-BUS communication interface
- Fast data transmission
Technical specifications
- Mounting: DIN top-hat rail TS35 suitable for installation in electrical sub-distribution boards
- Limit current for direct measurement: 63 A per phase conductor
- Power consumption: max. 3.0 W
- Current consumption: max. 13 mA
- Voltage: 3/N/230 V ~
- Frequency: 50/60 Hz
- Measured value output: balanced three-phase power measurement
- Interface: CAN bus, RJ45, isolated
- Current ratios for transformer measurement: 75 A/1 A to 4,500 A/1 A
- Technical specifications Current transformer: Secondary current = 1 A; rated power = min. 0.2 VA
- Connection cross-section power path: 16 mm 2 outer conductors; 1.5 mm2 neutral conductor
- Connection cross-section transformer connections: 1.5 mm 2
- Installation width: 4 TE (72 mm)
- Weight: 0.22 kg
- Protection class: IP00 (IP21 when installed)
- Relative humidity: ≤ 85 % non-condensing
- Operating temperature range: -25°C to +45°C
- Storage and transport temperature: -45°C to +75°C
- Protection class: II
- Overvoltage category: III
- Measuring accuracy offset: < 3 W
- Indoor use: up to 2,000 m above sea level
There are no reviews yet